delabs Circuits

Showing posts with label ASIC-SOC. Show all posts
Showing posts with label ASIC-SOC. Show all posts

Thursday, October 06, 2016

SCADA System - Project Idea

I am a student of Electronics and Instrumentation Branch from BP. I am doing my training at ..... where i have been assigned a project to implement SCADA System using Microcontroller.

Right now,i have a good knowledge of PSOC and AVR microcontrollers but since i am new to this technology,i am not getting how i should proceed for the project.i would be greatful to you if you can provide some information about the previous projects students have done in you organization regarding scada implementation.

from MG

A "SCADA System" may consist of a Human using a Computer with Special Software Overseeing a Process Control System made of many sensors, transmitters, autonomous controllers and actuators made of motor drives and heaters.

SCADA System has a Computer, sometimes Network, HMI, PLC Control Panel, Secondary Slave Instruments. Autonomous Process Control in Remote areas and Protection and Fallback Units.

SCADA System

SCADA – Supervisory Control and Data Acquisition

Some of these elements may send data to the computer which may Analyze and Indicate the condition of process or progress. The Human Operator can then fine tune the parameters of his system or study and record process cycles for quality and yield.

You discuss this with your mentor and then build a part of it, or implement a part of it in an existing system. A whole SCADA system is too big a project, but a simulated or demo software interface project can be made.
This will be posted comment on that post to continue. Any other doubt post as a comment, .

delabs

Tuesday, May 27, 2014

Cypress PSoC Mixed-Signal Array CY8C27x43

I had corresponded with you some time back when you had guided me to making a temperature controller .It was a very nice experience doing the same.

Just for your information , I am building the same using a PSoC( Programmable System on Chip). I will give a tiny snapshot from their site FYI. PSoC Mixed-Signal Array.

A true system-on-a-chip, PSoC devices are configurable mixed-signal arrays that integrate the microcontroller and related peripheral circuits typically found in an embedded design. Employing easy to use development tools, designers select configurable, pre-characterized library elements to provide analog functions such as amplifiers, ADCs, DACs, filters and comparators, and digital functions such as timers, counters, PWMs, SPI and UARTs. PSoC analog performance is instrumentation-quality ­ including rail-to-rail inputs, programmable gain, 14-bit ADCs and exceptionally low noise and input leakage and voltage offset.

I use the 8C27....

mail from TF

Programmable System-on-Chip - PSoC - CY8C27x43

The PSoC family consists of many Mixed-Signal Array with On-Chip Controller devices. These devices are designed to replace multiple traditional MCU-based system components with one, low cost single-chip programmable device. PSoC devices include configurable blocks of analog and digital logic, as well as programmable interconnects.

PSoC EvalPods

PSoC EvalPods are pods that connect to the ICE In-Circuit Emulator (CY3215-DK kit) to allow debugging capability. They can also function as a standalone device without debugging capability. The EvalPod has a 28-pin DIP footprint on the bottom for easy connection to development kits or other hardware. The top of the EvalPod has prototyping headers for easy connection to the devices pins. CY3210-27x43 provides evaluation of the CY8C27x43 PSoC device family.

CY3210 - CY8C27x43 PSoC(R) Evaluation Pod (EvalPod)